Specifications

Serial Communications (82050)
Appendix B includes the pin numbers and signal descriptions of the
RS-232-C and RS-485 signals available through connector J2. (See
page B-13.) When configured for RS-485, Data Terminal Equipment
(DTE) is selected by plugging in the serial cable with pin 1 of the
cable lined up with pin 1 of the connector. To select Data
Communication Equipment (DCE), the serial cable should be plugged
in with pin 1 of the cable lined up with pin 14 of the connector.
Pr
ogramming
Table 11-5 on the following pages summarizes the ACC register set
for programming reference.
11-24