Specifications

Jumper Configurations
Table A-1
Jumper Descriptions (continued).
JUMPER # DESCRIPTION
W60 Install W60 to ground the STD bus signal
MEMEX. Remove W60 to pull MEMEX up
through a 2.2 kΩ resistor to +5 V. Factory
default installs W60.
W60 Function
IN † MEMEX tied to Logic Ground
OUT MEMEX tied to Vcc
W61 Install W61 to ground the STD bus signal
IOEXP. Remove W61 to pull IOEXP up
through a 2.2 kΩ resistor to +5 V. Factory
default installs W61.
W61 Function
IN † IOEXP tied to Logic Ground
OUT IOEXP tied to Vcc
A-45