Use Manual

Shenzhen Huayu Hongxin Electronic Technology Co., Ltd.
2.4G wireless keyboard
Ver7.0
版
TEL: [phone] FAX: [phone]
2018/12/01 Page 1
2.4G Light-Up Keyboard /Mouse Manual (V7.0)
Product overview
1. Compatible with USB1.1/2.0 standard
2. High quality BK2425 RF, 16 channel adaptive frequency hopping work, stable/low power
consumption/strong anti-jamming ability, no direction
3. Ultra low power design (work =0.7mA, sleep=3uA)
4. Support 8*18 matrix, standard 104/107;
5. Supports FN + F1-F12 multimedia functions
6.Support low voltage alarm; Supports Caps Lock, Num Lock indicator lights, and LED status
synchronization with host
7. Support Mouse/Keyboard set mode
The code that
Mode one: key combination code
At the same time, short press "ESC" + "+/=" key for 1 second, the keyboard into the code
mode (low voltage indicator light is long on), 20S insert receiver code successfully, LED immediately
extinguished; Code failure, 20S after the keyboard exit code mode, LED out;
Method two: on the code key code
Press the key to code, the keyboard into code mode (low voltage indicator light is long), insert
the receiver in 20S. Code success, LED immediately extinguished; Code failure, 20S after the keyboard
exit code mode, LED out;
Method three: software code
Open the code matching software, insert the receiver into the USB interface, and automatically
enter the code matching mode. Press the keyboard code matching key or "ESC" + "+/=" key for 1
second for code matching within 20 seconds. If the code matching is successful, the software will
display < keyboard code matching is successful >; Otherwise, 20S after the launch of the code mode.