Operation Instruction

range of the corresponding network convergence unit.
3.2 Installation Instruction
3.2.1 Installation Method
Two different installation methods are designed for the sensor to make it
suitable for different application conditions, please refer to 1.4 Model Instruction
for specific model and corresponding installation method.
1. Strap type: A silicone band is used to attach the sensor to the measured
object, and the bottom thermal conductivity part is in close contact with the
measured object.
2. Overlap-type bracket: The thermal conductivity at the bottom of the
sensor is in close contact with the measured object, and the circular gasket for
mounting bracket only needs to be fastened with bolts.
3.3 Application Method
3.3.1 Transmission of Data Measuring
The sensor will measure temperature and related data at the given frequency
and then transmit the data to the receiving device in a wireless way.
3.3.2 Function of Keys and Indicator Light for Running
After one pressing on the key, there temperature data will be sent for once,
meanwhile, the indicator light will flash for once.
IV. Maintenance