Operation Instruction for ETS-BD-2G4 Wireless Temperature Sensor
Record of Document Modification Date Version Amendment Content Modifier Approved by 2019-12-27 V1.
Catalog NOTES FOR USERSNOTES FOR USERS .................................................................. 5 I. PRODUCT INTRODUCTION ............................................................................. 6 1.1 OUTLINE ....................................................................................................................................... 6 1.2 MAIN FEATURES .......................................................................................................................... 6 1.
5.1 REQUIREMENT FOR TRANSPORTATION.................................................................................... 11 5.2 REQUIREMENT FOR STORAGE ................................................................................................... 11 VI. SERVICE FOR ORDERS .................................................................................12 6.1 METHOD OF PLACING ORDERS ................................................................................................ 12 6.2 CUSTOMER SERVICE .
Notes for Users Objective: The manual provides operation instructions for the use & installation, debugging & configuration and operation of this (series of) product and it is provided to the user along with the purchased product. Please read the instruction carefully before using the product to ensure that you can use the product safely and correctly. After reading, please keep this instruction properly for later use.
Disclaimer: Zhuhai Yiduo Electrical Robotization Co.,Ltd. reserves the right to revise this publication and modify the contents of this document at any time without prior notice。 I. Product Introduction 1.1 Outline Through direct contact with the measured target body, online monitoring the temperature of the measured position, and being combined with wireless communication, this (series of) product realizes wireless temperature sensing. 1.
Dimension figure Dimension figure of product installed with strap (unit: mm) Dimension figure of product installed with overlap-bracket (unit: mm) 1.
installation is adopted Semiconductor-contact-type temperature measuring sensor, it's used for contact ETS-BD-2G4 Close contact measurement of the temperature of the target object on the bottom, overlap-bracket type installation is adopted 1.5 Main Function The sensor measures the temperature at a given frequency and transmits the data to the network convergence unit via a 2.4GHz wireless link.
Power source Disposable lithium battery Service life of battery 10 years Cycle of wireless uploading 180 seconds Note: the target reference is of black body BR400 2.2 Other index Product dimension Dimension (excluding the installation support) Weight of single product(excluding the accessories) 45*40.1*12.
range of the corresponding network convergence unit. 3.2 Installation Instruction 3.2.1 Installation Method Two different installation methods are designed for the sensor to make it suitable for different application conditions, please refer to 1.4 Model Instruction for specific model and corresponding installation method. 1. Strap type: A silicone band is used to attach the sensor to the measured object, and the bottom thermal conductivity part is in close contact with the measured object. 2.
4.1 This (series of) product is a kind of precise instrument. Therefore, strict attention shall be paid to avoid collisions, heavy strike, oil stains and strong magnetic fields; 4.2 This (series of) product shall be kept away from impact effects of drop strike and so on, or permanent breakdown may be caused; 4.2 When the battery of this (series of) product runs out of energy, the product can’ t work normally.
storage place shall be clean, and its ambient temperature shall be -20 ~+55, the relative humidity shall not exceed 85%, and there shall be no harmful substances which is able to cause corrosion. VI. Service for Orders 6.
on the application, design and other related issues of the product will be given, and corresponding technical support will be provided. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.