User's Manual

Charging esca
Simply plug the USB charging cable provided with esca into the USB port on your computer or
USB wall charger adapter. Connect the other end of the cable into the charging socket on the end
of esca (see diagram). The LED on esca will blink indicating the massager is charging. Please be
sure that the massager is completely dry before charging.
LED will glow steady ( ) when fully charged.
NOTE: The USB port is for charging use only, no data transmission functionality. When product
is charging, the product will not be able to vibrate until the USB cable is removed from
charging socket.
≈ 1.5-2 HRS TO REACH FULL CHARGE