User's Manual

UT-NET wireless router , WXLYQ-2_FB

UT-NET wireless router, WXXTQ-1_FB

Chapter II Installation

2.1 Installation Steps

 Install WXLYQ-1_FB UT-NETwireless router

1. Select the installation site. The installation site of wireless router is based on the actual distribution

network test results. Please see details in Instructions for Debugging of UT-NET Wireless Network .

2. Install the power. Each router is equipped with two cable terminals in parallel in the internal. Any

one of two terminals can be used to power the router, and the other terminal can be used to output to

power other routers. See below:

Figure 1

3. Install the antenna into the antenna input port as figure 1. Fix the router. Router comes with

mounting bracket, the special bracket can be customized as needed. Turn the antenna to the

vertically upward direction.

 Install the WXLYQ-2_FB UT-NET wireless router

1. Select the installation site. WXLYQ-2_FB UT-NET wireless router is used in conjunctions