User's Manual

33
◀ and ▶ keys: Forward and backward to switch the editing point;
▲ and▼ keys: Function keys, represents whether it is selected, and an appropriate key is
selected;
“Enter” key: Prompt whether it needs to save the key number that needs to apply for
unlocking;
“Digit” key: Response, when the entering is beyond the limit, it displays user’s first key
number with the unlocking permission;
“Esc” key: Prompt whether to exit from this interface, it is verified to return to the main
interface, if not, it will not exit.
a)Card Swiping authorization
In the card swiping authorization mode, after the key to be applied for unlocking is selected,
it enters the main interface to wait for other users to have card swiping authorization, and similar
to unlocking in the non-locking mode, it may refer to “4.2.1 Non-locking Mode”, so it is not
reiterated here.
b) Network authorization
In the network authorization mode, if the key to be applied for unlocking is selected, and hen
press the “Ok” key, it will display “Network application for unlocking key information has been
sent, please wait ...”, if the network communication failed, it will prompt “Network not connected,
please check ... ”.
It shall click the corresponding key card position to unlock on the key management system
interface.