User's Manual

29
Before U disk is inserted to open the door, the system will verify the inserted U disk, if
the inserted U disk is not registered with the support PC or doesn’t have the operating
permission of the management cabinet, it will prompt as follows. Press the “Enter” or “Esc”
key to return to the main interface:
After successful verification, refer to “4.1.2 Select the Operational Reasons and Key”,
after the operation is completed, closing the door will save the operation records in the U
disk that shall be removed after saving, at this moment, the user exits the locking mode of
the management cabinet, and the user may insert the U disk into the host to upload the
record to the host computer and display. Prompt is as follows:
请插入 U 盘开门
UNITECH
2014-05-23
10:18
Please insert U-Key!
The U-Key Has
No Auth!
U-Key User can
Not Operate In
Current State!
Saving records
do not remove
the U-Key!