User's Manual

28
Prompt interface of the management cabinet is as follows:
According to prompt, the user should insert the wrongly inserted key back into the
correct position.
4.1.2.2 Non-locking Mode
In the non-locking mode, the user must first select the operation reason (for how to select
the operation reasons, please refer to “4.1.2.1.2 Select the Operation Reasons”), then the
device will automatically unlock the door, and the user can take the key now. Users do not
have to select a key in non-locking mode.
4.1.3 U Disk Authorization
。
If the system is not equipped with U-Key mode, skip this section, and go directly to
“4.1.2 Select the Operation Reasons and Key”.
When the system is equipped with the U-Key mode, as shown in the figure below:
Have no
this key!
Position 3
back to 2!