User's Manual

25
Chapter 4 Key Management
4.1 Single Authorized Operation Mode
(For the number of the swiping cards, it may be unnecessary for the user to change after it is
configured by the technicians of our company.)
If the number of swiping the cards of the system is 1, as shown in the figure below:
At this moment, the system can only accept one user login, after the user has logged in (for
login, see “3.3 User Login”), it the user doesn’t have operation permission, the interface
prompts as follows:
Press the “Enter” or “Esc” key to return to the main interface of the system, now the
user has logged in and is able to start menu operation, for menu operation, refer to “Chapter 3
Functional Operation of the Management Cabinet”; to press the Esc Key to exit login.
4.1.2 Selection of the Operation Reasons and Key
The device has two modes for key management: Locking Mode and Non-locking
Mode. In the locking mode (requires hardware support), each key can independently lock, the
user can only remove the selected unlocked key, and other keys are in the mandatory locking
UNITECH
2014-05-23
10:18
Please swipe card
No Authorization !