User's Manual

such function is provided, currently editing options are highlighted in white.

 and keys: Switch the current configuration state of the options;

▲ and ▼ keys: Forward and backward to switch the editing point;

“Esc” key: Cancel the setting and return to the previous menu;

“Enter” key: Save the setting and return to the previous menu;

“Digit” key: no response;

3.4.4.3 Configure Key

Such menu displays after the key management cabinet selects the locking mode (in

Debug - > Operation mode), the menu is used to configure device’s independent locking

function, and the user can only operate the key with unlocking permission. Specific

configuration is as follows:

After the user enters the key permission configuration menu, it can use  and

keys to select the user who wants to configure the key permission (consistent with the

browser user interface display), once it is selected, press “Enter” key to enter the

interface below:

1 2 3 4

5 6 7 8

Config Key

 Unlock reason

 Key beep

Debug mode

Setting

：Edit