User's Manual

Users can set the time and date, but the user can not set the week, which is automatically

generated by system automatic calculation based on the set date of the current user. Users can

either use the “Digit” key to make direct input or use ▲ and ▼ keys to change operation. If

the user-entered value is not legitimate, system will automatically restore the value to the

legitimate value.

◀ and ▶ keys: Forward and backward to switch the editing point;

▲ key: Value plus 1;

▼key: Value minus 1

“Esc” key: Cancel the setting and return to the system setup menu;

“Enter” key: Save time setting, the system automatically returns to the system settings

menu;

“Digit” key: Directly enter settings;

3.4.4.2 Setting Mode

This menu is used to configure the “Door Open Cause”, “Button Buzzer” and “Debug Mode”.

“Door Open Cause” refers to that whether the user selects the “Door Open Cause” (for door

open cause, please refer to “Chapter 4 Key Management”) when the user opens the door to

take the unlocking key; “Button Buzzer” refers to that whether the buzzer is turned on when

the user presses the key; for the “Debug Mode”, if it chooses this feature, the system will

output debug information via the serial debug port, which is mainly used for problem analysis

and positioning in case of abnormality.

means such function is not provided, means

:28:39

Fri

2014-05-23

Set time

▲ ▼ ：Edit