User's Manual

User Manual for iKeyMU-1_F Smart Key
40
6.4 Outdoor/Indoor Mode
In outdoor operating, the key is exposed under sunlight and cause that users can’t
see the content on screen clearly, please switch to the outdoor display mode.
In the standby interface, press the Shortcut key to pop the shortcut menu as follows:
Press the Up / Down key to select the menu, select the “Outdoor” option, then press the
Enter key to enter the outdoor display mode as shown below:
Similarly, press the Shortcut menu under the outdoor mode, select the “Indoor” mode
to switch back to the indoor display mode. It is also available to enable the outdoor mode
as follows: hold down the On / Off key for 3 seconds after starting, the system can
automatically enable the outdoor display mode. After restart, the key can reset to the
default indoor mode.
Note: The battery runs out faster under the outdoor mode, thus it’s recommended to
use the system-default indoor mode in the case of a good visual effect.