User's Manual

User Manual for iKeyMU-1_F Smart Key
34
Operation Mode: set the continuous and discontinuous modes under the CDMA
communication mode.
5.8.3 Voice Settings
The menu functions as modifying voice-related parameters, including voice
settings, volume settings, recording module, enable recording, and Electroscope
voice.
Voice Settings: enable or disenable voice; when the voice is enabled, the key
can make voice prompts, and the buzzer doesn’t work; when the voice is disenabled,
the buzzer can make prompts, and the key can’t make any voice prompt. After
entering this menu, press the arrow keys to enable or disenable voice, press the Enter
key to save the current voice state. Press the Return key to the previous menu. The
interface is as shown as follows:
The key doesn’t support the Volume Settings now. The Enable Recording and
Recording Module are only available to the recording key, and used for enabling or
disenabling recording function. Electroscope Voice functions as enabling or
disenabling the voice prompts including “charged, prohibited to operate” and