User's Manual

User Manual for iKeyMU-1_F Smart Key
20
unlock, see details in the section “② Unlock with the smart key.”
② Unlock with the smart key
If use the smart key to unlock the device, please refer to the operation methods for
circuit or mechanical coding lock.
5.4.8 Unlock the Devices Locked by Feedback Circuit Locks
When the smart key shows the number for the device to be operated, please insert
the smart key into the device's feedback circuit lock; at first, the smart key can check if the
current state of the device is correct, if incorrect, the smart key can display the related
information, the smart key must be unplugged at this time, please do not continue any
operation until the current device is in the correct position.
The operation steps of Circuit Locks can be performed in accordance with the
operating procedures described in “5.4.2 Unlock the Devices Locked by the Circuit Locks
Such as Circuit Breaker, Electric Disconnector, etc.
When the operation is completed, the smart key can check if the position is correct,
the key can prompt “detecting feedback, please insert the key well!” The display interface
is shown as follows:
If the key detects that the device is correctly switched, the smart key can display the
following information, the operator can pull out the smart key, then the operation is
completed, the smart key continues to display the content of the next operation.