User's Manual

User Manual for iKeyMU-1_F Smart Key
16
A user can operate circuit lock or mechanical lock as needed, then the user should
insert the corresponding locks and press the Unlocking button to unlock, the smart key
rings “beep” and displays the following information:
It indicates that the smart key has completed its working; the user can remove the
smart key and continue the next operation.
While inserting the corresponding circuit lock, it is available to operate in accordance
with the steps described in “5.4.2 Unlock the Devices Interlocked by Circuit Locks Such as
Circuit Breaker, Electric Disconnector, etc.”
5.4.4 Unlock the Non-mandatorily Locked Devices
When the smart key displays “prompt”, “check”, “second operation” and other
information require operating a device, indicating the device number represents a
non-mandatory locked device, it is available to directly enter switching operation, after the
operation is completed , press the Enter key to check the prompt, and then release it, as
shown as follows: