User's Manual

User Manual for iKeyMU-1_F Smart Key
15
Press and hold down the “success” or “failure” key (for 2 seconds) to select the
operating results, “success” indicates that this step is complete, the key can enter the next
step; “failure” indicates that this step is not completed and will be restarted.
If the key is unplugged when it has not detected the complete operation signal over 2
seconds under the operation of circuit lock, it can show that the default key “success” is
white, and the other key is “failure” as shown as below:
Press and hold down the “success” or “failure” key ( for 2 seconds) to select the
operating results, “success” indicates that this step is complete, the key can enter the next
step; “failure” indicates that this step is not completed and will be restarted .
5.4.3 Unlock the Devices Interlocked by Circuit Lock and Mechanical Coding
Lock Such as Electric Disconnector.
When the smart key displays the information of the devices to be operated, please
insert the smart key into the circuit lock or mechanical coding lock of corresponding device,
it can ring “beep…” or prompt by voice “Correct, Please Operate!” (Available to set in the
system) and display “Correct Code, Please Operate!”