User's Manual

User Manual for iKeyMU-1_F Smart Key

Find the corresponding device matched with the displayed by the key on site, and

insert the smart key into the keyhole, if the code is correct, the smart key can ring “beep”

or make a voice prompt “Correct, Please Operate!” (Available to set in the system) and

display as follows:

Press the Unlocking button to open the mechanical coding lock at this moment and

then switch.

When the correct operation is completed, the smart key can ring “beep” and prompt

as follows:

Then the operator can continue the next operation.

Note: If the inserted lock’ code is not consistent with the displayed in the key, the key

can ring “beep” three times or make a voice prompt “Wrong Code, Please Check!”

(Available to set in the system) and display below, the above is the same to other types of

locks.