User's Manual

User Manual for iKeyMU-1_F Smart Key

prompts the information such as “connecting to the wireless network, GET MAC ...,” when

the UT-NET initialization is completed, it can enter the order-receiving interface. If the

communication mode is IRDA, the key can enter order-receiving interface directly.

Thereinto:

 If the key hasn’t self-learned, it can not enter the order-receiving interface, the screen

displays the information “the key hasn’t self-learned”, and a user must conduct

self-learning before receiving orders.

 Press the On / Off key to the main menu.

1) Under the UT-NET communication mode, a user can just set the master station to the

order-sending state to enable the key to receive orders.

2) Under the IRDA communication mode, a user needs to set mimic panel (or synthetic

operation interface and other devices) to order-sending state, and then aim the smart key

at transmission port of transmission adapter, and keep a distance within 1.2 meters, the

key can receive orders.

3) When the key is being charged on the transmission adapter, regardless of UT-NET

mode or IRDA mode, the key can receive orders if the user sets Model IV host or mimic

panel to (or synthetic operation interface and other devices) to the order-sending state,

and the smart key enters the order-receiving interface.

When the key starts receiving order data, it can display the following interface, the

progress bar shows the receiving progress of order data.