User's Manual

User Manual for iKeyMU-1_F Smart Key
10
Thereinto:
 Press the Return key to the previous menu。
1) Under the UT-NET communication mode, a user can just set the master station to
the self-learning state to enable the key to receive self-learning data.
2) Under the IRDA communication mode, a user needs to set mimic panel (or
synthetic operation interface and other devices) to self-learning state, and then aim
the smart key at transmission port of transmission adapter, and keep a distance
within 1.2 meters, the key can receive self-learning data.
3) When the key is being charged on the transmission adapter, regardless of
UT-NET mode or IRDA mode, the key can receive self-learning data if the user sets
Model IV host or mimic panel to (or synthetic operation interface and other devices)
to the self-learning state, and the smart key enters the self-learning interface.
When the key starts receiving self-learning data, it can display the following interface,
the progress bar shows the receiving progress of self-learning data.
When the self-learning data have been received, the smart key is capable of
processing and saving the received data.
5.3 Receive Operation Orders
A user can press the Up or Down key to select the option “Receive Orders” on the
main menu, and press the Enter key, if the communication mode is UT-NET, the key