Config Guide

-4-
-5-
4-wire villa intercom system diagram 2
Extension Connection Diagram
(2 outdoor station for 2 indoor monitors):
4C
outdoor
station 1
4C
AC
power
adapter
AC
power
adapter
2C
2C
outdoor
station 2
indoor monitors 1
indoor monitors 2
4C
3. System Settings
3.1Setting Device ID for additional monitors connected
Set main monitor ID for 1, if it isn’t already done so (factory setting is set
on 1) .On additional Monitors, set the device IDs by changing the device ID
from 1 to 2,3, 4, 5, 6 by doing the following:
1) Go to Menu, Select Settings. 2) Select System Settings.
3) At the very top, device ID is located, set device id accordingly by
pressing on angle bracket .
3.2 Door settings
The user can select the "Door settings" icon in the main interface to enter
the outdoor station settings. the outdoor station has enable switch, unlock
delay, record mode, mobile detection setting, message setting, signal
setting, ring setting.
Enable switch: door 1 is open by default, door 2 needs to be set to open,
when the system is connected to 2 door phones.
Signal setting: There are two types of door phone systems, and there are
seven types. You need to select the right signal system and type to talk to
each other. when you don’t know the system and type of the outdoor station,
select Auto, the machine will automatically select the appropriate system .
power adapter
AC
+
_
audio gnd v+ video
CN1
NC COM NO
CN2
- +
audio gnd v+ video
CN2
power adapter
CN1
outdoor station
Indoor monitor
+
_
magnetic lock
NO
COM
+
_
AC
+
_
AC
input
Detailed conection diagram
indoor monitor backview
outdoor station backview
4wires connection detail
4C
Standard Set Diagram
(1 outdoor station for 1 indoor monitor):
red blue
yellow white
4C
outdoor station
+
_
electronic Lock
power supply
power supply
4-wire villa intercom system diagram1