Config Guide

-3--6-
2.Indoor monitor
(the appearance, size, function of the product may be different from the
actual product, the actual product shall prevail)
CN2
CN1
J1
J2
K1
K2
P1
P2
Description of the outlet of the indoor monitor:
◆ CN1: 1. negative 2.Positive
Power outlet, DC power12--15V.connected to
◆ CN2: lock switch interface, connection to the lock.
◆ J1: to the outdoor station 1 J2: to the outdoor station 2
1.audio(red) 2.gnd(blue) 3.v+(yellow) 4.video(white)
◆ K1: to the camera 1 K2: to the camera 2
1.Alarm(red) 2.gnd(blue) 3.v+(yellow) 4.video(white)
◆ P1: indoor monitor input P2: indoor monitor output
the indoor monitor output connection to the next indoor monitor input.
front view
back view
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
+
-
Shortcut icon function:
Monitor
Hang up or return
unlock outdoor stationt or Press and hold for three seconds to
unlock the indoor unit.
Talk
Recording mode: You can choose to take photos or videos. When The
outdoor station call the indoor unit, the indoor unit can be saved on the TF
card by taking a photo or video.
Mobile detection: When an object moves in front of the door phone for a
certain period of time, the indicator light of the door phone will flash once,
and the indoor opportunity will record the video.
Message: Set the message recording duration and message switch.
ring setting : you can set the ring duration, volume and type.
3.3 Camera settings
The user can select the "Camera Settings" icon in the main interface to
enter the setting interface. The camera setting interface has an enable
switch, sensor type, alarm ring duration, recording mode, mobile detection
settings, signal type and standard.
3.4 Indoor unit status setting
At home status: The VTO calls the indoor unit, and after 30 seconds, no
one answers the prompt and turns to the message status.
Sleeping state: The VTO calls the indoor unit, the indoor unit will turn on
for 30 seconds after no ringing, the prompt will change to a message state.
Away from home status: The door phone will directly prompt to leave a
message when calling.
(Note: You need to turn on the message of the door phone.)
3.5 Clock and date display
The clock and date of the monitor can be set in the system menu. If you
do not operate the monitor for 1 minute, it will enter the screen saver state.
(Note: The time is automatically updated after the network is configured.)
3.6 advanced settings
Format SD card: Clear all video or picture records in the indoor unit SD.
Factory settings: restore the factory settings of the indoor unit.
Restart the system: The indoor unit restarts, and the indoor unit data
remains unchanged.
4. Intercom
4.1 Outdoor station incoming intercom
When the outdoor station calls in, the indoor unit automatically pops up
the video interface and rings at the same time. on the incoming interface:
press the "answer" button to stop ringing and start the call for 2 minutes.
press the "unlock" button to unlock the door phone.
press "+" to enlarge the video image, press "-" to reduce video image.