M120 Product Instruction Please read this Instruction carefully before using this product and keep it properly.
Operating humidity 20%-85% Storage humidity 5%--95%(Non condensation) 03 Component instruction Paper Exit Screen Power Button Feed Button USB USB Reset Hole Rope Hole Turn On /off (1)Press Power Button for 2 seconds to turn on the printer . (2)To turn it off ,please press the Power Button for 2 seconds . Feed : (1)Label paper /Black mark label:Press Feed Button to feed the tape to the proper place and get ready for printing next tape . (2)Continuous paper :Press Feed Button to keep paper feeding .
pressing Power Button (3)Press Power Button for 2 seconds to go back to the main page . 04 Installing the Paper Roll ①Hold the printer andlift the paper cover ②Take out the adjustable plate and remove the left panel ③ Put the paper roll ( Theprint sideshould be below) and push it to the right(Dividing ruler should be above Note the position of the paper rolldevice as shown) ④ Aim the adjustable plate at both slots and slowly put into the paper bin .
Print Condition External Electricity Charging Battery Logo area Text area Logo guidance Bluetooth When printer connects to Bluetooth ,this logo will light up .This logo will flash when the data is transferring . Setting /Transfer When you are using USB wire ,this logo will be shown as ;If you press Power Button for a short time ,it will be switched to Setting Mode ,the logo will be shown as Setting Mode . Cover Opening It indicates that the paper cover is opened or not closed correctly .
It will light up while the printer is printing or feeding External Electricity It will light up when the printer is connected to a power source . Charging Battery Please charge your printer when the power display begins to flash . Text Area This area shows related text information Screen setting Options Parameter Language English ,Chinese Print density 1(Lightest),2,3,4(Light),5,6(Normal),7,8,,9,10(Thick).111213,14,15(Thic kest ) Print speed 1(Slowest),2(Slow).
Shutdown ... Battery lower than 1% Printing ... Printing regularly Feeding ... Press Feed button Overheated ,please wait Print head is overheated No paper detected ... No paper in the bin or paper is installed incorrectly Cover opened .. The paper cover is opened 07Product warranty “Thank you for choosing the Portable label printer The free warranty period of this product is one year from the date of purchase (subject to the date of the official purchase invoice).
tampering ) Damage caused by unauthorized repair,disassembling,etc. Damage cauasd by human error . Damage caused by naturel disasters such as earthqua kes ,floods,windstorms ,lightning strikes or externai disasters su ch as fires and houas collapsas . Failure o damage causad by harsh conditions (oil,moisture ,direct sunlight etc .)or failure to use or care for as outlined by the instruction menual .
will not occur in a particular installation .If this equipment does cause harmful interference to radio or television reception ,which can be determined by turning the equipment off and on ,the user is encouraged to try to correct the interference by one or more of the following measures : ——Reorient or relocate the receiving antenna . ——Increase the separation between the equipment and receiver . ——Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
Gender: Phone : Address : Product Information Date of purchase : Product order number : Product serial number : Reason for Return(Replace/Repair/Request Malntenance ) Fault description : Maintenance Records : Fault conditions : Maintenance staff Processing situation : Repair date Repair ticket number : Date of inspection :
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
