Quick Start Guide
Table Of Contents
- 02 机器说明 Printer Components
- 03指示灯状态说明
- 03 Indicator Light Guide
- 04按钮功能
- 04 Button Function
- 7.1应用程序安装 Install App
- 7.2 耗材安装与更换 Install and change the printer’s consumable
- （1）耗材安装方法 Installing Consumable
- （2）耗材更换方法 Changing Consumable
- 08 官方打印纸类型 Official printing paper type
- Normal thermal paper: Does not contain Bisphenol-A. The printed texts can last for 7 to 10 years if stored in a dry condition at room temperature without direct sunray.
- Writable Quick-drying thermal paper: Thermal paper that does not contain Bisphenol-A, can be written on, and dries ink quickly. The printed texts can last up to 10 years if stored in a dry condition at room temperature without direct sunray.
- *The printing papers mentioned above are official Mr.In printing papers.
- *Any issues with your printer arising from using non-official printing papers will not be covered under our warranty policy.
03 指示灯状态说明
名称
状态
功能说明
电源指示灯
红灯亮
缺纸/开盖/高温
红灯闪 电量不足
绿灯亮 正常状态
绿灯闪 充电中
03 Indicator Light Guide
Name Status Description
Power Indicator
Lit (Red) Out of paper/ Cover is
open/ Overheat
Blinking (Red) Low power
Lit (Green) Normal
Blinking (Green) Charging
04 按钮功能
(电源)按钮功能 操作
开启打印机
按住此按钮约 3 秒钟，直到电源指示灯亮起
打印二维码 双击打印二维码，可手机 app 扫描二维码，连接机器
关闭打印机 按住此按钮约 3 秒钟，直到电源指示灯熄灭
04 Button Function
(Power) Button Function Operation
Turn on the printer
Press and hold the button for around 3 seconds until the power
indicator light turns on.
Print QR code Double-press the button to print QR code. You can scan the QR
code using the App on the phone and connect to the printer.
Turn off the printer Press and hold the button for around 3 seconds until the power
indicator light turns off.
05 Precautions
1. Please use 5V⎓2A input for charging, and it is recommended to use mobile phone power
adapter for charging.
2. Please connect the USB cable to the power adapter before charging，Please gently insert
or unplug the charging cable when charging, to prevent excessive force from damaging the
port.
3. After the charging is completed, please unplug the charging cable in time.