User's Manual

9-4
Steps of I Card Cop
1. Press ID Card Copy button to enter the ID Card Copy mode. The printer of this model
supports four types of ID Card copy, namely full page top to bottom, half page top to bottom,
half page left to right, A5 long side, examples are as follows:
(1) (2) (3) (4)
2. Put the ID Card on the left half of the scanning platform. The orange part is the placed area
of ID Print Type 1, while ID Print Type 2, 3, 4 are in the blue part. The corresponding top and
left sides of the blue part on the scanning platform are marked with scale line. The distance
between the blue part and the boundary is 5mm. Press Start button to start scan, then the
LCD will prompt Copying... ;

the ID Card: Start , the second line displays Scan Completed: O .

ID Card and keep it in the same area. After pressing down Start button, LCD will prompt
Copying... ; After completing scan, the front back of the ID Card will be copied to the same
page of the same paper;
5. If only one side is required, then press O button to end scanning. This time only one