User's Manual

power supply;
20.As the Class 1 equipment, the product must be connected to the power supply outlet with protective grounding line when using;
21.This product should be placed according to the shipping marks on the product package box during delivery;
22.This product is a kind of low-voltage equipment. When using this product below the specified voltage range,please refer to the
product precautions or call Pantum Aftersales Service Centre, if the toner comes off the printed contents, or the equipment starts
slowly;
23.This product is sold as a complete machine. The consumers can go to Pantum Aftersales Service Centre to purchase parts they
need. If the product sold is inconsistent with the package list, please go to the specified Aftersales Service Centre to solve the
problem;
24.Install this product in a place with the temperature between 10℃ and 35℃ and the relative humidity between 20% and 80%;
25.This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
26.IC Radiation Exposure Statement:
This equipment complies with Canada and FCC radiation exposure limits set forth for uncontrolled environments.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
27.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
28.Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
29.The power consumption of the product is 3.137W in networked standby if all wired network ports are connected and all wireless
network ports are activated;
30.Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
31.This Class B digital apparatus complies with Canadian ICES-003.
32.Please keep this User Guide properly.
Legal Information