User Guide

ManualsBrandsZhuhai Pantum Electronics ManualsComputers & AccessoriesMonochrome Laser Multifunction Printer

Table Of Contents

Preface
Legal Notice
Safety Precautions
Precautions
Legal Information
Table of Contents
1. Before Using the Printer
- 1.1. Product series introduction
- 1.2. Supplied Accessories
- 1.3. Product View
- 1.4. Laser Toner Cartridge
- 1.5. Control Panel
  - 1.5.1. Overview of control panel
  - 1.5.2. Function of numeric keyboard
- 1.6. Function of status indicator
- 1.7. Function of power indicator
2. Paper and Print Media
- 2.1. Paper Specification
- 2.2. Special Paper
- 2.3. Non-printing Area and Non-scanning Area
- 2.4. Loading Paper
  - 2.4.1. Loading into the Automatic Feeder Tray
  - 2.4.2. Install manual feed tray
- 2.5. Paper and Manuscript Use Process
  - 2.5.1. Scanning With Tablet
  - 2.5.2. Scan with the automatic document feeder (ADF)
3. Driver installation and uninstallation
- 3.1. How to install Windows printer driver
- 3.2. macOS system driver installation
  - 3.2.1. Driver installation
- 3.3. Add printer to macOS system
4. Wired network setup (applicable to wired network models)
- 4.1. Set IP Address
  - 4.1.1. Automatic Setting
  - 4.1.2. Manual Setting
5. Wireless network setup (applicable to Wi-Fi models)
- 5.1. Basic structure mode
- 5.2. Wi-Fi Direct mode
- 5.3. Wireless network setup FAQs
6. Web server
- 6.1. Visit the embedded Web server
- 6.2. Use Web server to manage printer
7. Print
- 7.1. Print Function
- 7.2. Print Settings
- 7.3. Cancel printing
- 7.4. Printing Mode
  - 7.4.1. Printing with the Automatic Feeder Tray
  - 7.4.2. Printing with manual feed tray
- 7.5. Automatic Two-Sided Printing
  - 7.5.1. Duplex printing unit setup
  - 7.5.2. How to carry out auto duplex printing
- 7.6. Fine mode printing
- 7.7. Mute printing
- 7.8. Auto shut-off setting
- 7.9. Open Help Document
8. Copying
- 8.1. Copying function
- 8.2. Copying method
- 8.3. Copying cancel
- 8.4. Common copying setting
- 8.5. ID card copying setting
- 8.6. Receipt setting
  - 8.6.1. Intensity
  - 8.6.2. Paper setting
9. Scan
- 9.1. Pull Scan
- 9.2. macOS System Scan
  - 9.2.1. ICA Scan
  - 9.2.2. TWAIN Scan
- 9.3. Push Scan
- 9.4. Cancel Scan Job
10. Fax
- 10.1. Connect Devices
- 10.2. Fax Settings
- 10.3. Fax Functions
- 10.4. PC-Fax
  - 10.4.1.Sending Fax with PC-Fax
11. Mobile Print/Scan/Fax
- 11.1. "Pantum" APP
- 11.2. Mopria mobile print
- 11.3. NFC label
  - 11.3.1. Preliminary preparations
  - 11.3.2. How to print
- 11.4. AirPrint mobile print
12. General Settings
- 12.1. System Settings
- 12.2. Network Settings
- 12.3. Network Information
- 12.4. Print information report
- 12.5. Residual amount of toner
- 12.6. Configure the e-mail address book
- 12.7. Configure the FTP address book
- 12.8. Online upgrade
13. Routine Maintenance
- 13.1. Cleaning the Printer
- 13.2. Toner cartridge and drum component maintenance
  - 13.2.1. About toner cartridge and drum component component
  - 13.2.2. Replace toner cartridge and drum component
14. Troubleshooting
- 14.1. Cleaning Jammed Paper
- 14.2. Software Failure
- 14.3. Error Message
- 14.4. Common Troubleshooting
  - 14.4.1. Common Trouble
  - 14.4.2. Image Defects
- 14.5. Fax faults
15. Menu Structure
16. Product Specifications
- 16.1. Overview of the Specifications
- 16.2. Print Specifications
- 16.3. Copy Specifications
- 16.4. Scan Specifications
- 16.5. Fax specification (applicable to machine with a fax)

7.8. Auto shut-off setting

“Auto shut-off setting” to set off condition and off delay of printer.

1. Enter computer “Start Menu” – “Control Panel” – View “Devices and Printers”.

2. Right click printer, select “Printer properties” in drop-down list.

3. Enter “Secondary Settings” option and set “Auto shu-off setting”.

4. Click “OK” to finish setting.

Note：

• For printer provided with LCD control panel, users may set auto off function through

control panel keys. Please refer to Chapter 12.1.7.

• Individual countries (or regions) do not support auto off setting.