User Guide
Table Of Contents
- Preface
- Legal Notice
- Safety Precautions
- Precautions
- Legal Information
- Table of Contents
- 1. Before Using the Printer
- 2. Paper and Print Media
- 3. Driver installation and uninstallation
- 4. Wired network setup (applicable to wired network models)
- 5. Wireless network setup (applicable to Wi-Fi models)
- 6. Web server
- 7. Print
- 8. Copying
- 9. Scan
- 10. Fax
- 11. Mobile Print/Scan/Fax
- 12. General Settings
- 12.1. System Settings
- 12.1.1. Ink saving setting
- 12.1.2. Language Setting
- 12.1.3. Restore Factory Settings
- 12.1.4. Sleep Time Setting
- 12.1.5. Mute printing
- 12.1.6. Print a Page for Clean & Fix
- 12.1.7. Auto shut-off setting
- 12.1.8. Sound/volume (applicable to machine with the fax feature)
- 12.1.9. Time/date (applicable to machine with the fax feature)
- 12.2. Network Settings
- 12.3. Network Information
- 12.4. Print information report
- 12.5. Residual amount of toner
- 12.6. Configure the e-mail address book
- 12.7. Configure the FTP address book
- 12.8. Online upgrade
- 12.1. System Settings
- 13. Routine Maintenance
- 14. Troubleshooting
- 15. Menu Structure
- 16. Product Specifications
19
Note:
• Please put the paper or document on the scanner glass after the glue, ink or correction
fluid are completely dried.
• Rough textured, uneven, oil stained and extremely smooth paper will make printing
effect poor.
• Please make sure that there is no dust, fluff, etc. on the paper.
• Paper shall be put on a flat surface and stored under a cool and dry environment.
• To avoid influencing the definition, please don't open the scanner cover during
scanning with the platen.
2.5.2. Scan with the automatic document feeder (ADF)
1. Put the original into the ADF with its front upward and top fed first.
2. Adjust the document guide till it gets close to the paper stack.
Note:
• The ADF supports feeding 50 pieces of paper at most that should be fed one by one.










