User's Guide
Table Of Contents
- Preface
- Legal Notice
- Safety Precautions
- Precautions
- Regulatory Information
- Table of Contents
- 1. Before Using the Printer
- 2. Paper and Print Media
- 3. Driver installation and uninstallation
- 4. Wired Network Settings (For wired network printer models)
- 5. Wireless network setup (applicable to Wi-Fi models)
- 6. Mobile Print (for models with Wi-Fi function only)
- 7. Print
- 8. Control Panel
- 9. Routine Maintenance
- 10. Troubleshooting
- 11. Product Specification
III
Safety Warning
Please note the following safety warnings before using the printer:
Warning
There is a high-voltage electrode inside the printer.
Before cleaning the printer, make sure the power is
turned off!
Plugging and unplugging the power cord plug with a
wet hand may result in an electric shock.
The fuser unit is hot during and after printing.
Touching the fuser unit (the shaded area as shown)
may cause burns!
The fuser unit bears a high temperature warning label.
Please do not remove or damage this label.