Instruction Manual

How to install APP:
The anemometer provides 2 systems.
Android (IOS) is installed.
1, scan the top of the two-dimensional code
picture.
2, install mobile phone application prompts
according to mobile phone.
3, after installation, the anemometer should
be turned on before use and then turn on the
Bluetooth transmission function of mobile
phone.
4, when the green light is on, the match is
successful. Click the start button on the
mobile phone interface, and the anemometer
and mobile phone can be transmitted in two
directions.
5, when the shutdown time is set to 0, it will
not automatically turn off. When the
automatic setting is closed, the anemometer
will automatically sleep. At this time, it can
be awakened by the button on the button
anemometer.
6, the power interface is located on the right
side of the anemometer, and can be
connected to the power adapter below 12V.
Above picture and content just for your reference.
Please be subject to the actual products if anything
different or updated. Please pardon for not
informing in advance.
CONTACT US
For any problem or concern, welcome to email us
for prompt response.
✉ [e-mail]
P.S.
To make sure you can receive immediate solution
and your requests processed quickly, please email
us with information below:
1. Order Number
2. Platform of Your Purchase
3. Full Model Number
4. Description of the Problem
(Attaching videos or photos can help us
troubleshoot the problems even faster)