Instruction Manual

Anemometer Instruction manual
1 .Function:
1) Wind speed & temperature
2) Wind chill indicstion
3) ℃/℉
4) Different wind speed measurement unit
5) Measure wind speed in: Current/Average/Max/Min
6) Low battery warning
7)LCD back-light
8)Manual/Auto Power Off
2.Operation：
1) Put battery into battery compartment, All the
Symbol will blink for 1 second on the display
2) Recover battery cover, screw down press“①”in
1 second to turn on the unit. LCD will display wind
speed, temperature and battery icon. Press again, it
will power off.
3) Setting different wind speed unit：Press “②”each
time, it will circulated among “ m/s ” , “ Km/h ” ,
“Ft/min”, “Knots”,and “mph” Digit symbol:
M/s meter per second; km/h kilometer per hour;
Ft/min feet per minute; knots nautical mile per hour;
mph mile per hour;
4)Max/min: Press“③”it will display max or min
5)Back light：Press“④“，back light will turn on, press
again, it will turn off , active for 15 second.
6) ℃/℉ switch option: Press“⑤”to select different
temperature unit.
7)Average: Press " ⑥ " , average reading in 15
seconds will be displayed.
8) Measurement: when the wind vane (impeller) turns,
LCD instant display wind speed and temperature.
When temperature below 0 ℃ , wind chill symbol
will show on the LCD.
3 Specifications:
Wind Speed Range
Unit
Range
Resolution
Accuracy
M/s
0.3~30
0.1
±5%
Ft/min
59~5905
19
Knots
1~55
0.2
Km/h
2~90
0.3
Mph
1~65
0.2
Temperature range
Unit
Range
Resolution
Accuracy
℃
-10℃~45℃
0.2
±2℃
℉
14℉~113℉
0.36
±3.6℉
Battery
AAA 1.5V×2
Thermometer
NTC thermometer
Operating
temperature
-10℃~45℃(14℉~113℉)
Relative humidity
≤90%RH
Store temperature
-40℃~60℃(-40℉~140℉)
Current consumption
About 3mA
Weight
153g(including battery)