User Manual

Oplink Communications

1 / 3

SRN1300 User Guide

I. Product Introduction

SRN1300 is a 433MHz wireless siren; if it receives an activating signal from the

system, it will sound loudly and indicator light will flash. Siren can be stopped

manually by remote control.

System Structure

PAGE 1
Oplink Communications SRN1300 User Guide I. Product Introduction SRN1300 is a 433MHz wireless siren; if it receives an activating signal from the system, it will sound loudly and indicator light will flash. Siren can be stopped manually by remote control.
PAGE 2
Oplink Communications II. Installation (1) Determine the location of the Indoor Siren, which should be placed: • Indoors and way from direct sunlight. • Away from extreme temperature sources and large metal objects. • Within a few feet of an electrical socket, so the AC adapter can be easily used. (2) Installation: • Hang the siren on to the wall by keyhole, using the wall plugs and screws provided. • Power on Siren. The indicator light will flash every five seconds when the siren is powered on. III.
PAGE 3
Oplink Communications FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.