User Manual

Oplink Communications
2 / 3
II. Installation
(1) Usage scenario:
• Indoors and away from direct sunlight.
• Away from extreme temperature sources and large metal objects.
(2) Operation：
• Unscrew the screw to open the back cover of Remote control.
• Insert the battery noting the polarity (A23 battery); Slide back the
cover and screw fastening with the front cove.
III. User Instruction& Workflow
(1) Press “ ” once to set arm mode of the system.
(2) Press “ ” once to set disarm mode of the system.
(3) Press “ ” once to send an emergency alert to the system.
(4) If RMC1300 is in low battery status(9.6±0.4V), it will report a message to
the system along with the control signal generated when one of the buttons
is pressed. Please change the battery then.