User's Manual

Oplink Communications
LED indicators description of the back and side panel:
(From L to R)
¾ WPS/RESET: Wi-Fi Protection Setup button and
system reset button. Press it for 1 second, the
WPS feature will be enabled and WPS indicator
will be shown blinking. Press this button for 7
seconds, the settings configured in this device
will be deleted and it will restore the settings to
the default one.
¾ Power: The port is for USB line connection.
Please use the included USB line connected with
the power adapter or the USB port of computer.
¾ LAN/WAN: The 100Mbps Ethernet port, in
Wireless Router mode, it is a WAN access port to
connect the DSL, MODEM generally. While in
AP, WISP mode, Client+AP mode, WDS+AP