User's Manual

Oplink Communications
auto-negotiation speed.
 SSID：SSID (Service Set Identifier) is the unique
name of the wireless network. This device has two
SSID and the main SSID is necessary.
 Broadcast (SSID): Select “Enable” to enable the
device's SSID to be visible by wireless clients. The
default is enabled. If you disable it, the clients must
know the SSID to communicate.
 BSSID：Basic Service Set Identifier of wireless
network. In IEEE802.11, BSSID is the MAC address
of wireless access point.
 Standard Channel：Specify the effective channel
(from 1 to 13\Auto) of the wireless network.
 Extension Channel：To increase data throughput of
wireless network, the extension channel range is
used in 11n mode.
 Channel Bandwidth：Select the channel bandwidth
to improve the wireless performance. When the
network has 11b/g and 11n clients, you can select the
40M; when it is an 11n network, select 20/40M to
improve its throughput.