User's Manual

Oplink Communications
Chapter 7 Wireless Setting
7.1 Basic Settings
 Enable Wireless: Check to enable the Router’s
wireless features; uncheck to disable it.
 Network Mode ： Select one mode from the
following. The default is 11b/g/n mode.
11b mode： Allow the wireless client to connect
with the device in 11b mode at the
maximum speed of 11Mbps.
11g mode： Allow the 11g/11n-compliant client
device to connect with the AP at the
maximum speed of 54Mbps.
11b/g mode: Allow the 11b/g-compliant client device
to connect with the AP with
auto-negotiation speed, and 11n
wireless client to connect the device
with 11g speed.
11b/g/n mode: Allow the 11b/g/n-compliant client
device to connect with the AP with