User's Manual

Oplink Communications
 MAC Address: The device’s physical MAC address
as seen on your local network is unchangeable.
 IP Mode: There are two modes, Static IP and
Dynamic IP. If you select Static IP, you need to input
the parameters provided by your ISP. If you choose
Dynamic IP, you should adjust the connection
properties to obtain an IP address and DNS sever
automatically in Internet protocol.
 IP Address: The device’s LAN IP addresses.
192.168.2.1 is the default value. If you change it, you
need to use the new IP to login to the Web interface.
 Subnet Mask: It’s shown the device’s subnet mask
for measurement of the network size. 255.255.255.0
is the default value.
 Default Gateway: Input the Gateway provided by
your ISP. If you are not sure, please consult your ISP.