User's Manual

Oplink Communications
 Channel: Specify the effective channel (from 1 to
13\Auto) of the wireless network.
 Broadcast (SSID): Select “Disable” to disable the
device’s SSID to be invisible by the wireless client. If
you disable it, client must input the same SSID as the
device to access.
 BSSID: Basic Service Set Identifier of wireless
network. In IEEE802.11, BSSID is the MAC address
of wireless access point.
 Extend Channel：To increase data throughput of
wireless network, the extension channel range is
used in 11n mode.
 Channel Bandwidth：Select the channel bandwidth
to improve the wireless performance. When the
network has 11b/g and 11n clients, you can select the
40M; when it is an 11n network, select 20/40M to
improve its throughput.
Click “Next” to save configurations.
Note: We suggest you do not change the channel in this
mode, or else you can not access the device which you
want to connect.
For wireless network encryption, please refer to 7.2.