User's Manual

Oplink Communications
5.3. WDS+AP Mode Setup Wizard
Log on the web-based interface as chapter 4 and then
configure the mode as below.
5.3.1. Select “WDS+AP”, click “Setup Wizard” and
“Next” button.
5.3.2.Configure the parameters.
 AP MAC Address: Input the MAC address of the
terminal wireless device. Wireless MAC address also
can be named as BSSID. The terminal wireless device
can be an AP with WDS function or a wireless router.
 Channel: Specify the effective channel (from 1 to
13\Auto) of the wireless network. The channel you set
must be the same as the terminal device.
 Encrypt Type: The encrypt type security mode you set
should be the same as the terminal device. More
details please refer to the Wireless Security Settings
chapter.
We recommend you “Scan” the access points and then
select the SSID in your scanned SSID list for convenience.
Click “Next” to the following interface.