User's Manual

- 26 -
End IP address options. When you are finished, click Add
to save the range setting. You can repeat the action to
assign multiple ranges for the camera.
- IPv6: Enter the IP Address that is allowed to access the
camera.
z Deny
- IPv4: Assign a range of IP addresses that are blocked to
access the camera by entering the Start IP address and
End IP address options. When you are finished, click Add
to save the range setting. You can repeat the action to
assign multiple ranges for the camera.
- IPv6: Enter the IP Address that is not allowed to access the
camera.
For example, when you enter 192.168.0.50/192.168.0.80 in
Start/End IP Address of Accept > IPv4, the user whose IP address
located within 192.168.0.50 ~ 192.168.0.80 will be allowed to access
the camera. On the other hand, if you enter the IP range in
Start/End IP Address of Deny > IPv4, the user whose IP address
located within the range will not be allowed to access the camera.