User's Manual

- 24 -

- Static IP: Select this option to assign the IP address for the

camera directly. You can use IPFinder to obtain the related

setting values.

IP Enter the IP address of the camera. The

default setting is 192.168.0.30.

Subnet Mask Enter the Subnet Mask of the camera. The

default setting is 255.255.255.0.

Default Gateway Enter the Default Gateway of the camera.

The default setting is 192.168.0.1.

Primary/

Secondary DNS

DNS (Domain Name System) translates

domain names into IP addresses. Enter the

Primary DNS and Secondary DNS that are

provided by ISP.

- PPPoE: Select this option when you use a direct connection

via the ADSL modem. You should have a PPPoE account from

your Internet service provider. Enter the User Name and

Password. The camera will get an IP address from the ISP as

starting up.

NOTE Once the camera get an IP address from the ISP as starting

up, it automatically sends a notification email to you.

Therefore, when you select PPPoE as your connecting type,

you have to set up the email or DDNS configuration in

advance.

 DDNS Setting

With the Dynamic DNS feature, you can assign a fixed host and

domain name to a dynamic Internet IP address. Select the Enable

option to enable this feature. Then, select the Provider from the

pull-down list and enter the required information in the Host Name,

User Name, and Password boxes. Please note that you have to