User's Manual

When in the weighing mode, press the Unit button to select your desired unit (g, fl.oz., lb:oz,

ml).

The units will be displayed in the LED display. (The default unit is g)

Initial Start-Up

CAUTION

Finishing the unit selection, you may start to weigh according to

the weighing procedure below. If there is no operation and the weight

is steady in weighing mode, the scale will turn off automatically in

about 1 minute. Or you can press and hold the ON/OFF/TARE button

for about 2s to turn it off.

Installing the App and Pair-Up

Note: It is only available for the device which supports BLE 5.0 technology.

The Hapi Health App is now available to download from the App Store and Google

Play. You may search and install the app in your smartphone.

Turn on Bluetooth for your smartphone.

Download and open the App.

Create an account (optional) or click “Try now” to use as a guest.

Turn on the scale and make sure the screen is on.

Press “Add Device” on the App, and the scale will pop out, press “Go to add”.

Wait till the connection is accomplished, then press “Next”.

Press “Done” and the scale will be shown on HomePage of the App.

Bluetooth Smart wireless technology, also known as Bluetooth Low Energy or BLE,

enables the Kitchen Scale to automatically send weight measurements to your

smartphone for enhance functionality.

NOTE:

Open the App before turning on the kitchen scale for successful pairing. If you have

troubles pairing the scale with the App, press and hold the UNIT button for about 5

seconds with the scale on, when it shows “CLr” and turn off, then start over at step 1.

Initial Start-Up

Changing the Weight Unit

fl.oz.