User's Manual

Select Measurement Unit

With batteries correctly installed, press “UNIT” button in the back of the scale to select

measurement unit. The default measurement unit is “kg”. You may press “UNIT” button to

choose between kilogram and pound.

With original SENSE ON patent technology, GBF-2008-B3 will switch on as you step

on the platform barefooted.

Daily Measurement

Stand still and keep full contact with the electrodes until the LED stops blinking digits.

CAUTION

Interference may occur in the vicinity of equipment marked with the following symbol . And

the Analyzer may interfere vicinity electrical equipment.

To enable the data transmission function, this product should be paired to a Bluetooth 5.0 or

above end.

How to mitigate possible interference?

1. The range between the Analyzer and the Bluetooth end should be reasonably close, from 1

meter to 10 meters. Please ensure no obstacles between the Analyzer and the Bluetooth end

so as to obtain quality connection.

2. To avoid interference, other electronic devices (particularly those with Bluetooth transmission

/ Transmitter) should be kept at least 1 meter away from the Analyzer.

With GBF-2008-B3 successfully pair-up with your smartphone, the measurement data will

be transmitted to your mobile via Bluetooth.

ONLY when the measuring results are attached to a specific User ID will it be transmitted

to your mobile after measurement.

The symbol will display after successful data transmission, and you may check your

personal health data stored in your smartphone.

If the data transmission fails, the symbol doesn’t display. The pending measurement

data will be temporarily kept in the scale and transmitted to your smartphone when next

measurement is complete.

Data Transmission

Start Measuring

Manage Your Health