version:1.0 User Manual Body Fat Analyzer GBF-2008-B3 Thank you very much for selecting the Transtek Body Fat Analyzer GBF-2008-B3. ZHONGSHAN TRANSTEK ELECTRONICS CO., LTD No.23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
Table of Contents Table of Contents Safety Information Safety and Usage Information ............................................................................................... 2 Tips ........................................................................................................................................... 3 Overview Device Components ................................................................................................................. 4 List ..................................
Safety Information Safety Information Safety and Usage Information The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury. Please kindly find the meanings of the warning signs and symbols, which you may encounter in the label and user manual, as follows: Symbol for “THE OPERATION GUIDE MUST BE READ” Symbol for “MANUFACTURER” Symbol for “RECYCLE” Caution: These notes must be abserved to prevent any damage to the device.
Overview Overview Device Components LED Display LED Display UNIT Button Pound Bluetooth Connection Indication Kilogram Battery Compartment Sensor List 1. Body Fat Analyzer GBF-2008-B3 2. Four AAA-size Batteries (1.5V per each) 3.
Initial Start-Up General Instructions Transtek Body Fat Analyzer GBF-2008-B3 applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate body fat. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also possesses the characteristics of simple operation and abundant information. The current mentioned above is less than 0.5mA.
Start Measuring Select Measurement Unit With batteries correctly installed, press “UNIT” button in the back of the scale to select measurement unit. The default measurement unit is “kg”. You may press “UNIT” button to choose between kilogram and pound. Manage Your Health Data Transmission With GBF-2008-B3 successfully pair-up with your smartphone, the measurement data will be transmitted to your mobile via Bluetooth.
Troubleshooting Troubleshooting Error Prompt Error Description Overload. Low Battery. Solution Stop using this scale for measurement. Replace all four batteries in the same time. Please purchase the authorized batteries for replacement. Problem Root Cause Abnormal measuring results: - Too high; - Too low; - Huge difference between two recent measurement. Your feet are too dry. Batteries not yet installed. No display on LED when the device powers on. Worn batteries. When Measuring ...
Troubleshooting Specifications Specifications Product Name When Data Transmitting ... Problem Data transmission failed. Root Cause Solution Bluetooth is OFF. Turn ON the Bluetooth via Settings. The APP is OFF. Press the icon to turn ON your APP. Out of range of Bluetooth transmission. Place your smartphone closer to the scale. None of the user ID is assigned. Please assign a User ID on the APP. Dimension Scale: 300x300x27.6mm (Approximately) Net Weight Approximately 1.
Maintenance Maintenance When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts: DO use a dry soft cloth to wipe the dust. DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. DON’T wash the device with water or immerse it in water. DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction. DON’T disassemble this device.
Appendix Appendix Warning Warning：Don’t near active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high. Warning： Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally.
Appendix Appendix Table 3 Table 2 Guidance and manufacturer’s declaration - electromagnetic Immunity Immunity Test IEC 60601-1-2 Compliance level Test level Electrostatic discharge (ESD) ±8 kV contact ±8 kV contact IEC 61000-4-2 ±2 kV, ±4 kV, ±8 kV, ±15 kV air ±2 kV, ±4 kV, ±8 kV, ±15 kV air Electrical fast transient/burst Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable IEC 61000-4-4 Surge Radiated RF IEC61000-4-3 (Test specifications for ENCLOSU
