version:1.0 User Manual Glass Body Fat Analyzer GBF-1717-W Thank you very much for selecting the Transtek Glass Body Fat Analyzer GBF-1717-W. ZHONGSHAN TRANSTEK ELECTRONICS CO., LTD No.23,Jin'an Road,Minzhong,Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
Table of Contents Table of Contents Safety Information Safety and Usage Information ............................................................................................... 2 Tips ........................................................................................................................................... 3 Overview Device Components ................................................................................................................. 4 List ..................................
Safety Information Safety Information Safety and Usage Information The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury.
Overview Overview Device Components LCD Display LCD Display User Key(ID1) User Key(ID2) User Key(ID3) User Key(ID4) Touch Key Successful analysis Successful APP Connection Pound Data pending to transmit to smartphone Battery Compartment Sensor List 1. Body Fat Analyzer GBF-1717-W 2. Four AAA-size Batteries (1.5V per each) 3.
Start Measuring Initial Start-Up Insert the Batteries Open the battery door in the back of the scale. Remove insulating strip from beneath the battery (if fitted) or insert batteries (4 x 1.5V AAA) observing the polarity signs (+ and -) inside the battery compartment. * The digits “8888” will be shown on the LCD. Close the battery door and wait until the digits “0.0lb” are shown on the LCD.
Troubleshooting Data Management Error Prompt Data Transmission Error Once the Body Scale GBF-1717-W is successfully connected to your smartphone, please open the APP and turn on your Wifi connection. Keep smartphone and scale in transmission distance. Step on the scale and take a measurement. Once the measurement is finished the data is automatically transferred to the APP.
Troubleshooting Specifications Specifications When Measuring ... Problem Abnormal measuring results: - Too high; OR - Too low; OR - Huge difference between two recent measurement. Product Name Root Cause Solution Dimension Scale: 321x321x25.5mm (Approximately) Net Weight Approximately 2.08kg ( Including the dry cells) Display Your feet are too dry. Wipe your feet with a damp cloth, keeping them slightly damp when starting measurement. No display on LCD when the device powers on. Worn batteries.
Maintenance Maintenance When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts: DO use a dry soft cloth to wipe the dust. DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. DON’T wash the device with water or immerse it in water. DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction. DON’T disassemble this device.
Appendix Health Tips - About Body Fat Human body is made up of, amongst other things, a percentage of fat. Body fat is vital for a healthy, functioning body, protects vital organs, helps regulate body temperature, stores vitamins and helps the body sustain itself when food is scarce. However, too much body fat or indeed too little body fat will damage to your health. It is difficult to gauge how much body fat we have in our bodies simply by looking at ourselves in the mirror.
Appendix Appendix Warning Warning：Don’t near active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high. Warning： Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally.
Appendix Table 3 Radiated RF IEC61000-4-3 (Test specifications for ENCLOSURE PORT IMMUNITY to RF wireless communications equipment) Guidance and manufacturer’s declaration - electromagnetic Immunity Test Frequency (MHz) Band (MHz) Service Modulation Modulation (W) Distance (m) 385 380 – 390 TETRA 400 Pulse modulation 18 Hz 1,8 0.3 IMMUNITY TEST LEVEL (V/m) 27 450 430 – 470 GMRS 460, FRS 460 FM ± 5 kHz deviation 1 kHz sine 2 0.
