User's Manual

11
10
Start Measuring
Data Management
With original SENSE ON patent technology, GBF-1714-F will automatically switch
on as you step on the platform barefooted.
Stand still and keep full contact with the electrodes until the LCD displays the
weight.
Daily Measurement
Make sure your Wi-Fi is connecting, the analysis
results will automatically identify the User ID which
you had set. The results are also sent to the
phone's APP.
Weight Only Operation
Your TRANSTEK Body Fat Analyzer will operate as a conventional weight - reading
scale. No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on the
scale to measure your current weight. For only weight reading.
1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect
accuracy.
2. Step onto the scale platform and remain still while the scale computes your weight.
3. The scale will display your weight value.
4. The scale will automatically turn off after a few seconds.
CAUTION
Interference may occur in the vicinity of equipment marked with the following symbol . And
the Analyzer may interfere vicinity electrical equipment.
To enable the data transmission function, only 2.4G WI-FI network is supported.
How to mitigate possible interference?
1. The range between the Analyzer and the Wi-Fi end should be reasonably close, from 1
meter to 10 meters. Please ensure no obstacles between the Analyzer and the Wi-Fi end
so as to obtain quality connection.
2. To avoid interference, other electronic devices (particularly those with Wi-Fi transmission
/ Transmitter) should be kept at least 1 meter away from the Analyzer.
The symbol will disappear after successful data
transmission, and you may check your personal
health data stored in your smartphone.
If the data transmission fails, the symbol will
remain. The pending measurement data will be
temporarily kept in the scale and transmitted to your
smartphone when next measurement is complete.
Data ready to transmit to
the App:
-If SUCCEED, the symbol
disappears;
-If FAIL, the symbol
remains.
Data Transmission
Please open the App and turn on your Wi-Fi, so that the Body Scale GBF-1714-F can
successfully connected to your smartphone. Keep smartphone and scale in transmission
distance. Step on the scale and take a measurement. Once the measurement is finished
the data is automatically transferred to the app.
Successful Wi-Fi
Connection