User's Manual

Start Measuring Start Measuring

If SUCCEED, icon will be shown on the LCD, and the

Wi-Fi icon will stop blinking and keep on.

If FAIL, symbol “Conf ” will be shown on the LCD. (Please

refer to Troubleshooting for more

Note: If the Wi-Fi icon blinks slowly on the LCD, you can click the top right corner “AP

Mode” to pair up your scale.

Start Measuring

STEP 1: Step on the platform barefooted.

Note: You can also click lower right corner “Setting” to open “Distribute Automatically”,

after opening, data will be automatically allocated according to body weight

deviation(within+/-2 kg). This is an automatic and manual allocation scheme.

4. Then you can pair up your scale with your smartphone through the following steps:

STEP 2: Make sure your Wi-Fi is connecting, the

results will send to the phone's APP.

STEP 3: Set your personal information at the APP, and click latest measurement

record to distribute your User ID.