User's Manual

CAUTION
Interference may occur in the vicinity of equipment marked with the following symbol . And
the Analyzer may interfere vicinity electrical equipment.
To enable the data transmission function, this product should be paired to a Bluetooth 4.0 end.
How to mitigate possible interference?
1. The range between the Analyzer and the Bluetooth end should be reasonably close, from 1
meter to 10 meters. Please ensure no obstacles between the Analyzer and the Bluetooth end
so as to obtain quality connection.
2. To avoid interference, other electronic devices (particularly those with Bluetooth transmission
/ Transmitter) should be kept at least 1 meter away from the Analyzer.
The indicator backlight will light with different color when the measuring results are
shown on the LED.
Compared with the last record of the same user ID, when the current weight is
increased over 0.5kg, the red backlight lights; when it is reduced over 0.5kg, the green
backlight lights; when it is the same(in the range of +/-0.5kg), the blue backlight lights.
Backlight Indicator
Note: when it is the first measurement for a User ID, the system default backlight is blue.
1312
With original SENSE ON patent technology, GBF-1406-B will switch on as you step on
the platform barefooted.
If it fails to identify the possible User ID, the LED will only display the weight data.
(To find out the solutions, please refer to Troubleshooting for more details.)
When your scale is successfully paired with your smartphone and the Bluetooth is ON,
GBF-1406-B will process data transmission instead.
(Please refer to Data Transmission for more details.)
ONLY when the measuring results are attached to a
specific User ID will it be transmitted to your mobile
after measurement.
The symbol will disappear after successful data
transmission, and you may check your personal
health data stored in your smartphone.
If the data transmission fails, the symbol will
remain. The pending measurement data will be
temporarily kept in the scale and transmitted to your
smartphone when next measurement is complete.
Successful Bluetooth
Connection
Data transmitting to
wireless wellness system:
-If SUCCEED, the symbol
disappears;
-If FAIL, the symbol
remains.
Start Measuring
Daily Measurement
Manage Your Health
Data Transmission
Stand still and keep full contact with the scale until the LED stops displaying
moving “o”.
Once the Body Fat Analyzer GBF-1406-B is successfully
paired-up with your smartphone, please open
the “Medm Health” App and turn on your Bluetooth.
Keep smartphone and scale in transmission distance.
Step on the scale and take a measurement. Once the
measurement is finished the data is automatically
transferred to the app.
After the weight is locked, the system will automatically identify the possible User ID
with most similar history records.
If it identifies one user, it will skip the step about user selection, then display the Body Fat,
Total Body Water, Muscle Mass and Bone Mass data sequentially three times and turn off.
If it identifies two or more users,for example, P1, P2 and P3,The LCD will display these
users altermately twice. you may press key to choose the left User ID or press key to
choose the right User ID. The measuring results will then be sorted into the User ID you
selected and displayed sequentially three times. If you don’t choose the user, it will display
the weight again and turn off after a few seconds.