User's Manual

9
8
Initial Start-Up
The body fat analyzer GBF-1319-B6 supports multiple users (Up to 8). You may follow
below instructions to assign User ID and set up your own profile, including Gender,
Stature, and Age.
Set Up Your Profile
After confirming Gender, the system will divert to Stature setting automatically.
As pictured below, the digits “ 165 ” blinks. The operator may press the function key
or to increase or decrease the numeral.
You may press and hold the function key or for fast changing the numeral.
Press “SET” key to confirm Stature.
After confirming User ID, the system will divert to Gender setting automatically.
As pictured below, the portrait blinks. The operator may press the function key
or to select Gender.( Male/Female/Male Athlete/ Female Athlete).
Press “SET” key to confirm Gender.
With batteries correctly installed, press “SET” key when the LCD displays 0.0 to enter
setting mode.
The system will request User ID selection first. As pictured below, “P1” blinks. The
operator may press the function key or to select User ID among P1 to P8.
Press “SET” key to confirm User ID.
1.Assigning User ID
2.Setting Gender
3.Setting Stature
Athlete Mode:
An athlete is considered as a person who does 10 hours or more per week of aerobic
activity and has a resting heart rate of 60 beats per minute.These individuals should
select Athlete Mode for the most accurate measurement results.The body fat analyzer
are not calibrated for professional athletes or body builders.
After confirming Stature, the system will divert to Age setting.
As pictured below, the digits “30” blinks. The operator may press the function key or
to increase or decrease the numeral.
You may press and hold the function key or for fast changing the numeral.
Press “SET” key to confirm Age.
4.Setting Age
5. After confirming the Age, the LCD will display “0.0”, then you can start measuring.
6. Repeat procedure for a second user, or to change user details.
Note: To update or overwrite the memorised data, follow the same procedure, making
changes as required.
Weight Only Operation
Your TRANSTEK Body Fat Analyzer will operate as a conventional weight - reading scale.
No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on the scale to
measure your current weight. For only weight reading.
1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy.
2. Step onto the scale platform and remain still while the scale computes your weight.
3. The scale will display your weight value.
4. The scale will automatically turn off after a few seconds.
Note: The weight value won’t be saved in the scale, and won’t be transmitted to the APP.
Initial Start-Up